vectron international www.vectron.com v. 2006 - 11 - 10 page 1 of 6 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 w atts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C2260 tcxo typical applications features pcs base stations efc standard land mobile radio low profile cellular telephony small size radio in the local loop 100 % rohs compliant frequency range 6.4 mhz ? 52 mhz standard frequencies 10; 12.8; 16.384; 19.44; 20 ; 20.48mhz frequency stabilities 1 parameter min typ max. units operating temp range ordering code 5 vs. operating temperature range - 1.5 - 1.0 +1.5 + 1.0 ppm ppm - 40?..+85c - 40?..+85 c f156 f106 (referenced to +25 c) - 2.5 +2.5 ppm - 20 ? +70c d256 - 1.0 +1.0 ppm - 20 ? +70c d106 - 1.0 +1.0 ppm 0 ? +50c b106 - 0.5 +0.5 ppm 0 ? +50c b507 parameter min typ max. units condition initial tolerance vs. supply voltage change vs. load change vs aging /1. year - 2.5 - 0.5 - 0.2 - 1 .0 +2.5 +0.5 +0.2 +1.0 ppm ppm ppm ppm at time of shipment, nominal efc v s 5% load 10% frequency stabilities 1 [ stratum 3 tcxo] < 32mhz parameter min typ max. units operating temp range ordering code 5 vs. operating temperature range - 0.8 + 0.8 ppm - 20 ? +70c d807 (referenced to +25 c) - 0.28 +0.28 ppm 0 ? +50c b287 * - 0.28 +0.28 ppm - 20 ? +70c d287 * - 0.80 +0.80 ppm - 40 ? +85c f807 - 0.28 +0.28 ppm - 30 ? +85c g287 * - 0.28 +0.28 ppm - 40 ? +85c f287 * paramet er min typ max. units condition initial tolerance vs. supply voltage change vs. load change vs aging /15 years overall tolerance - 1.0 - 0.2 - 0.1 - 2.5 - 4.6 +1.0 +0.2 +0.1 +2.5 - 4.6 ppm ppm ppm ppm ppm at time of shipment, nominal efc v s 5 % load 10% note * stratum 3 per gr - 1244 - core: <4.6 ppm for all causes and 20 years aging,holdover: <0.37 ppm over 24 hours (code: d287 & b287 & g287 & f287 )
vectron international www.vectron.com v. 2006 - 11 - 10 page 2 of 6 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 w atts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C2260 tcxo frequency stabilities 1 tcxo for ocxo replacement parameter min typ max. units oper ating temp range ordering code 5 vs. operating temperature range (referenced to +25 c) - 0,15 + 0,15 ppm 0 ? +50c b15 7 for 10; 12.8; 16.384; 20; 26 mhz parameter min typ max. units condition initial tolerance vs. supply voltage change v s. load change vs aging /15 years overall tolerance - 1.0 - 0.2 - 0.1 - 2.5 - 4.6 +1.0 +0.2 +0.1 +2.5 - 4.6 ppm ppm ppm ppm ppm at time of shipment, nominal efc v s 5% load 10% note * stratum 3 per gr - 1244 - core: <4.6 ppm for all causes and 20 years aging,holdover: <0.37 ppm over 24 hours (code: d287 & b287 & g287 & f287 ) supply voltage (vs) parameter min typ max. units condition ordering code 5 supply voltage [standard] 3.135 3.3 3.465 vdc d current consumption 6 ma steady state @ +25c rf output parameter min typ max. units condition ordering code 5 signal [standard] clipped sinewave > 12.288mhz m load r 9 10 11 k || c 9 10 11 pf output power 0.7 v pp @ 10k w ||10pf parameter min typ max. units condition ordering cod e 5 signal [standard] hcmos a load 13.5 15 16.5 pf signal level (vol) 0.3 vdc with vs=3.3v and 15pf load signal level (voh) 3.0 vdc with vs=3.3v and 15pf load rise and fall time 5 ns duty cycle 40 50 60 % @ (voh - vol)/2 frequency tuning (efc) or enable parameter min typ max. units condition ordering code 5 tuning range fixed tcxo; no adjust 0 tuning range for d807;b287;d287;f807;g287;f287 stratum 3 version 5.0 14.0 20.0 ppm 1 tuning range 8.0 14.0 20.0 2 linearity 10 % tuning slope positive control voltage range 0.3 1.65 3.0 vdc with vs=3.3vdc freq. control input impedance 10 k w enable (instead of efc) true table rf_out e pin 2 pin 3 high data open data low high tristate
vectron international www.vectron.com v. 2006 - 11 - 10 page 3 of 6 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 w atts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C2260 tcxo additional parameters parameter min typ max. units condition phase noise 3 - 90 dbc/hz 10 hz @19.44mhz - 120 dbc/hz 100 hz - 135 dbc/hz 1 k hz - 140 dbc/hz 10 khz - 145 dbc/hz 100 khz weight 2 g processing & packing handling & processing note absolut e maximum ratings parameter min typ max. units condition supply voltage (vs) 6.0 v control voltage 0 vs v operable temperature range - 40 +85 c storage temperature range - 55 +125 c cross reference list vectron part frequency [mhz] temp range c temp. stability [ppm] h/over stab. [ppm] overall stab. [ppm] supply [v] C2260a1 - 0028 12,8 - 20?70 0,28 0,37 4,6 3,3 semtech C2260a1 - 0032 12,8 - 40..85 0,28 0,37 4,6 3,3 semtech C2260a1 - 0029 12,8 - 40..85 4,6 20 3,3 semtech C2260a1 - 0021 20 - 20?70 0,28 4,6 3,3 zarlink C2260a1 - 0009 20 - 20..80 0,28 4,6 3,3 zarlink C2260a1 - 0015 20 - 40..85 4,6 20 3,3 zarlink standard shipping method *bei w 24 mm nur untere lochreihe * by w 24 mm only lower hole line gurtoberseite tape upper side gurtunterseite tape buttom side abwickelrichtung unwinding direction lage im gurt position in tape pin 1 a x p b k production tolerance complying din iec 286 - 3 enclosure type tape width w [mm] quantity per meter quantity per reel dimension p g204 /g211 12 150. 750. 8
vectron international www.vectron.com v. 2006 - 11 - 10 page 4 of 6 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 w atts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C2260 tcxo enc losures code a code b package codes: package codes: type height ?h? pin length ?l? type height ?h? g204 2.5 na g211 2.5 dimensions: mm dimensions: mm pin connections 1 voltage control (vc) / enable / n.c 2 ground (case) 3 rf output 4 supply voltage input (vs) marking C2260 - xxxx frequency * c ayyww
vectron international www.vectron.com v. 2006 - 11 - 10 page 5 of 6 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 w atts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C2260 tcxo typical measurement data phase noise mtie according - 1244 - core : C2260 @12.8mhz C2260 @12.8mhz recommended reflow profile
vectron international www.vectron.com v. 2006 - 11 - 10 page 6 of 6 vectron international headquarters 267 lowell road hudson, new hampshire 03051 + 1 - 888 - 328 - 7661 tel + 1 - 888 - 329 - 8328 fax vectron international llc. 1 00 w atts street mount holly springs, pa 17065 usa +1 - 717 - 486 - 3411 tel +1 - 717 - 486 - 5920 fax vectron international gmbh & co. kg landstrasse d - 74924 neckarbischofsheim germany +49 - 07268 - 801 - 0 tel +49 - 07268 - 801 - 281 fax vectron asia pacific sales office 1f - 2f, no 8 workshop, no 308 fenju road, waigaoqiao free trade zone, pudong, shanghai, p.r. china 200131 +86 21 5048 0777 tel. +86 21 5048 1881 fax C2260 tcxo pr ofile feature pb - free assembly /sn - pb assembly profile feature pb - free assembly /sn - pb assembly average ramp - up rate (t l to tp) 3c/second max. time 25c to peak temperature 8 minutes max. preheat - temperature min ts min ) - temperature min ts max ) - time (min to max) (ts) 150c 200c 60 - 180 seconds time maintainted above - temperature (t l ) - time (t l ) 217c 60 - 150 seconds ts max to t l - ramp - up rate 3c/second max. time maintainte d above - temperature (t l ) - time (t l ) 217c 60 - 150 seconds time within 5c of actual peak temperature (tp) 20 - 40 seconds peak temperature (tp) max 260c ramp - down rate 6c/second max. note: all tempera tures refer to topside of the package, measured on the package body surface. how to o rder this product: model stability code supply voltage code rf output code package code frequency control/ enable frequency c 2260 f287 d a a 1 6.4 mhz vs.operat. temp. range supply: tuning range: f15 6 1.5ppm - 40 ? +85c d: 3.3v 0: fixed tcxo; no adjust f 106 1.0ppm - 40 ? +85c 1: 5.0 ppm ? 20.0 ppm d256 2.5ppm - 20 ? +70c 2: 8.0 ppm ? 20.0 ppm d106 1.0ppm - 20 ? +70c e: enable b106 1.0ppm 0 ? +50c enclosure: b507 0.5ppm 0 ? +50c d807 0.8ppm - 20 ? +70c a: g204 b287 0.28ppm 0 ? +50c b: g211 d287 0.28ppm - 20 ? +70c signal: f807 0.8ppm - 40 ? +85c g287 0.28ppm - 30 ? +85c m: clipped sinewave f287 0.28ppm - 40 ? +85c a: hcmos b157 0.15ppm 0 ? +50c notes: 1 contact fac tory for improved stabilities or additional product options. not all options and codes are available at all frequencies. 2 unless otherwise stated all values are valid after warm - up time and refer to typical conditions for supply voltage, frequency contr ol voltage, load, temperature (25c) 3 phase noise degrades with increasing output frequency. 4 subject to technical modification. 5 contact factory for availability.
|
